Ammonia-treated activated carbon as support of Ru-Ba catalyst for ammonia synthesis

Ammonia-treated activated carbon has been studied as a support of Ru-Ba catalyst for ammonia synthesis. It is shown that the introduction of nitrogen leads to a decrease of ammonia synthesis activity for the catalysts with a low Ba/Ru molar ratio, while no significant changes are obtained for the catalysts with a high Ba/Ru molar ratio, confirming that electronegative impurities suppress the activity in ammonia synthesis and consume part of the promoters. This revised version was published online in June 2006 with corrections to the Cover Date.     

紫外拉曼光谱研究焙烧气氛对氧化锆相变的影响

 以紫外拉曼光谱技术研究了在不同焙烧气氛中氧化锆样品的表面晶相结构及其转变过程．结果表明，在有氧气氛中焙烧的氧化锆样品易转变为单斜相，而在惰性气氛中焙烧可以有效地稳定样品体相和表面的四方相结构．在缺氧气氛中焙烧的样品暴露于空气中后，表面极易转变为单斜相，而其体相仍为四方相结构，这表明四方相氧化锆在样品表面是极不稳定的．     

CeO2及Pt/CeO2催化剂上H2、O2的作用特性

采用TPD、TPR、FT-IR和TPEC等方法研究了CeO_2及Pt/CeO_2上H_2、O_2作用特性。结果表明, Pt促进CeO_2还原, 并形成高活动性氢物种。Pt的存在使吸H_2和放氢温度下阵达300 ℃。部分还原的CeO_2常温下吸附氧形成分子离子氧物种(O_2~-, O_2~(2-)), Pt的存在改变氧化铈催化剂在常温下氧吸附物种的形态, 以解离态存在。氧化铈上吸附的氧物种在升温时可部分脱附, 高于170 ℃时则转化为晶格氧。     

气相[（SiO2）nX]^—团簇产生机理

利用ＸｅＣｌ准分子激光烧蚀多种硅氧多孔结构材料，在负离子通道测得丰富的「（ＳｉＯ２）ｎＸ」＾－负离子团簇，并讨论了多孔网结构和表面活性基团的分布对激光能量的吸收，传输及团簇产生的重要作用。     

Copper-exchanged LTA zeolite membranes with enhanced water flux for ethanol dehydration

Phase-pure and well-intergrown Cu-LTA membranes are developed through copper ions exchange of sodium ions in Na-LTA framework. For pervaporation of 90.0 wt% ethanol/10.0 wt% water mixtures, the Cu-LTA membrane shows much higher water flux than Na-LTA membranes due to the enhancement of the pore size after ions exchange.     

配合物聚合反应研究──Ⅱ．以二氨基磺磷酸盐配合物合成聚脲

以二氨基磺酸盐配合物合成了一系列主链上合金属元素（Ｃａ，Ｎｉ，Ｃｏ，Ｃｕ）的聚脲聚合物．用ＩＲ和１ＨＮＭＲ对其结构进行了表征，以ＴＧ－ＤＴＡ研究了其热性能，并讨论了金属元素种类及其含量对聚脲聚合物溶液粘度的影响．     

Relationship between the molybdenum phases and the conversion of n-butane over Mo/HZSM-5

The conversion of n-C₄H₁₀ was undertaken on MoO₃/HZSM-5 catalyst at 773–973 K and the phases of molybdenum species were detected by XRD. The XRD results show that bulk MoO₃ on HZSM-5 can be readily reduced by n-C₄H₁₀ to MoO₂ at 773 K and MoO₂ can be gradually carburized to molybdenum carbide above 813 K. The molybdenum carbide formed from the carburization of MoO₂ with n-C₄H₁₀ below 893 K is -MoC_1−x with fcc-structure, while hcp-molybdenum carbide formed above 933 K. During the evolution of MoO₃ to MoO₂ (>773 K) or the carburization of MoO₂ to molybdenum carbide (>813 K), deep oxidation, cracking and coke deposition are serious, in particular at higher reaction temperatures, these lead to the poor selectivity to aromatics. Aromatization of n-C₄H₁₀ can proceed catalytically on both Mo₂C/HZSM-5 and MoO₂/HZSM-5, the distribution of the products for the two catalysts is similar below 813 K, but the activity for Mo₂C/HZSM-5 is much higher than that for MoO₂/HZSM-5.     

血清中葡萄糖含量CCQM-K11.1国际比对

研究利用同位素稀释质谱法测定血清中的葡萄糖含量，并利用该方法参加国际物质量咨询委员会（CCQM）2005年组织的关键比对CCQM—K11．1，我国国家标准物质研究中心（NRCCRM）的测定结果与韩国（KRISS）和墨西哥（CENAM）的测定结果非常接近，日本（NMIJ）的测定结果离群偏高。     

稀土Pr_6O_(11)表面上低碳烃氧化反应的原位FT-IR研究

前文报道了CO与Pr_6O_(11)表面反应的结果.已发表的关于烃类与氧化物表面反应的研究,旨在了解烃类的活化和表面氧化机理,而且大部分工作都是在过渡金属氧化物上进行的.近年来的研究表明,稀土氧化物将是有潜力的甲烷氧化偶联制乙烯的催化剂,在消除环境污染的烃类完全氧化催化剂中,稀土氧化物也常被用作助剂或活性组分,但对于稀土氧化物本身的催化表面研究尚不多见.作者曾较系统地研究了CeO_2的表面催化性质,发现表面上存在多种氧物种,这些氧物种与烃类的反应活性差异很